|
| |
TM 5-2420-222-34
9-3.
REAR AXLE HOUSING, SHAFTS, SEALS, BEARINGS, AND PLANETARY PINION CARRIER MAINTENANCE
(Con’t).
6.
Remove screw (30), lockplate (29), and washer (31) from axle shaft (15) and planetary pinion carrier (32).
7.
Remove spacer (33) and shims (34) from axle shaft (15) and planetary pinion carrier (32).
8.
Remove planetary pinion carrier (32) with assembled parts and thrust washer bearing (35) from axle shaft (15) and
rear axle housing (1).
9.
Remove retaining ring (36), three planetary pinion shafts (28), spur gears (26), 69 roller bearings (27), and six thrust
washer bearings (25) from planetary pinion carrier (32).
10. Remove lifting device from rear axle housing (1).
11. Using hammer and brass drift, drive axle shaft (15) out until free of tapered cone and rollers (43) and rear axle
12. Remove axle shaft (15) from rear axle housing (1).
13. Remove tapered cone and rollers (43) from rear axle housing (1).
14. Using mechanical gear and bearing puller kit, remove plain encased seal (41) from rear axle housing (1). Discard
plain encased seal.
TA701444
9-17
|
