|
| |
TM 5-2420-222-34
8-17.
REVERSER BRAKE HOUSING REPAIR (Con’t).
CAUTION
Do not lose roller bearings that form part of planet pinions when removing
gearshaft. Loss of roller bearings will damage equipment.
4.
Remove gearshaft (6) from carrier (4).
5.
Remove washer (5) from gearshaft (6).
6.
Remove carrier (4) from spur gear (2).
7.
Remove bearing washer (3) from spur gear (2) in reverser brake housing (1).
NOTE
Repeat steps 8 and 9 to remove remaining two gears.
8.
To remove gear (16) from carrier (4), push shaft (18) a slight distance
from carrier and remove ball bearing (13) from end of shaft.
CAUTION
Do not lose roller bearings that form part
of planet pinions when removing shaft.
Loss of roller bearings will damage
equipment.
9.
Pull shaft (18) out of carrier (4) and remove gear (16), 23 roller
bearings (15), two washers (14), a spacer (17).
TA701405
8-73
|
