|
| |
TM 5-2420-222-34
8-17.
REVERSER BRAKE HOUSING REPAIR.
This Task Covers:
a.
Disassembly
c.
Assembly
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Reverser brake housing removed (see para-
•
Grease (Item 22, Appendix B)
graph 8-16).
•
Rags (Item 28, Appendix B)
Tools/Test Equipment
•
Dry cleaning solvent (Item 31, Appendix B)
•
One preformed packing
•
General mechanic's tool kit
•
One spring pin
•
Field automotive shop set
•
Three spring washers
•
Modified oil filter cover
General Safety Instructions:
•
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a.
DISASSEMBLY
1.
Remove spring pin (11) from gearshaft (6). Discard spring pin.
2.
Remove three screws (10), deflector (9), bearing washer (12), and hub (8) from carrier (4).
3.
Remove thrust washer (7) from gearshaft (6).
TA701404
8-72
|
