|
| |
TM 5-2420-222-34
8-6.
DIFFERENTIAL DRIVE SHAFT ASSEMBLY MAINTENANCE.
This Task Covers:
a.
Removal
c.
Repair
b.
Cleaning and Inspection
d.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Transmission drive shaft removed (see
•
Rags (Item 28, Appendix B)
paragraph 8-5). •
Dry cleaning solvent (Item 31, Appendix B)
•
Shim, 0.002 in. thick (as required)
Tools/Test Equipment:
Shim, 0.005 in. thick (as required)
•
Shim, 0.010 in. thick (as required)
•
General mechanic's tool kit
•
Field automotive shop set
General Safety Instructions:
References:
•
Dry cleaning solvent is flammable and must not be
•
TM 9-214
used near open flame. Use only in a well-ventilated
area.
8-29
|
