| |
TM 5-2420-222-34
8-2.
TRANSMISSION MAINTENANCE (Cont).
NOTE
Transmission has two rear axle housings. Removal of rear axle housings is the
same. Left side is shown. Repeat steps 10 and 11 as required for right side.
10.
Using lifting device, support rear axle housing (5). Remove 12 screws (14) from rear axle housing and
transmission (6).
11.
Using lifting device and the aid of an assistant, lift rear axle housing (5) and gasket (15) off transmission (6) and
set on wood blocks. Discard gasket.
12.
Remove reverser housing (see paragraph 8-16).
b.
DISASSEMBLY
1.
Remove transmission rear cover (see paragraph 8-3).
2.
Remove transmission countershaft and bearing support (see paragraph 8-4)
3.
Remove transmission drive shaft (see paragraph 8-5).
4.
Remove differential drive shaft assembly (see paragraph 8-6).
5.
Remove differential lock mechanism (see paragraph 8-9).
6.
Remove transmission relief valve (see paragraph 8-22).
TA701361
8-8
|