|
| |
TM 5-2420-222-34
7-2.
ENGINE STARTER REPAIR (Con’t).
CAUTION
Be careful when handling coil and pole pieces. Scraping insulating varnish from
coil could cause grounding to main frame or pole pieces, or shorted windings.
NOTE
If coil, pole pieces, and machine screws were not removed, skip step 17.
17.
Position four pole pieces (40) in place on coil (39). Install coil and pole pieces in main housing (2) and secure with
eight machine screws (41).
18.
Install grommet (42) on end of angle bracket (6). Press grommet and angle bracket in main housing (2).
19
Install two wire terminals (45). new self-locking bolt (44), and new lockwasher (43) on angle bracket (6).
TA701352
7-24
|
