|
| |
TM 5-2420-222-34
5-4.
FUEL TANK REPAIR.
For information on fuel tank repair, refer to TB 43-0212.
5-5.
SPEED CONTROL SHAFT REPLACEMENT.
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Speed control arms removed (see TM 5-2420-
•
Grease (Item 22, Appendix B)
222-20).
•
•
Rags (Item 28, Appendix B)
•
Cowl support removed (see paragraph 13-5).
•
Dry cleaning solvent (Item 31, Appendix B)
•
One cotter pin
Tools/Test Equipment:
General Safety Instructions
•
General mechanic’s tool kit
•
Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
a.
REMOVAL
1 .
Remove cotter pin (4), washer (5), and speed control rod (1) from speed control shaft (2). Discard cotter pin.
2.
remove speed control shaft (2) from cowl support (3).
TA701331
5-18
|
