|
| |
TM 5-2420-222-20-3
JAW DIRECT LINEAR VALVE (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-137).
Replace defective parts as needed.
20.
All metal parts
Look for cracks and breaks.
21.
All threaded parts
Look for damaged threads.
ASSEMBLY
22.
Plug (8)
New packing (9)
Place in position.
23.
Valve (1)
Plug (8)
a.
Place valve(1)in machinist’s vise
with assembled
with vise jaw caps.
packing (9)
b.
Screw in and tighten using 1 1/2-inch
open-end wrench.
24.
Two bulkhead
Two nuts
Screw on all the way.
elbows (2 and 3)
(4 and 5)
25.
Two new packings
Place in position.
(6 and 7)
2-1255
|
