|
| |
TM 5-2420-222-20-3
LOADER BUCKET LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-137).
Replace defective parts which cannot be repaired.
13.
All threaded parts
Look for damaged threads.
14.
All metal parts
Look for cracks, breaks, burrs, and
abnormal bends.
REPAIR
15.
Bucket link (1)
If threads are damaged, using pipe thread
set, restore threads.
ASSEMBLY
16.
Bucket link (1)
Grease fitting (2)
Screw in and tighten using 7/16-inch, 1/4-
inch drive socket and ratchet handle.
17.
Three bushings
If removed, using arbor press and 2-inch
(3, 4, and 5)
remover and installer, push in.
INSTALLATION
18.
Lift arms (6)
Two front guide
Place in position.
links (7 and 8)
19.
Lift arms (6)
and Pin (9)
a.
Have assistant aline pin holes of arms
two front guide
(6) and links (7 and 8).
links (7 and 8)
b.
Using 3-pound head cross-peen hammer, tap in.
20.
Loader bucket (10)
Bucket link (1)
Place in position.
21.
Loader bucket (10)
Pin (11)
a.
Have assistant aline pin holes of
and bucket link (1)
bucket (10) and link (1).
b.
Using 3-pound head cross-peen hammer, tap in.
2-1848
|
