|
| |
TM 5-2420-222-20-3
BACKHOE BUCKET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
60.
Pin (4) and
Cotter pin (6)
a.
Using multiple tongue and groove slip-
special washer (5)
joint pliers, straighten ends.
b.
Using 1/4-inch straight drive-pin punch
and 2-pound head ball-peen hammer,
drive out.
c.
If not just replaced during installation,
get rid of.
61.
Pin (4) and
Special washer (5)
Take off.
inner bucket (7)
62.
Pin (8) and
Ring (9)
On loader backhoes equipped with retaining
inner bucket (7)
rings, using retaining ring pliers, take off.
63.
Guide link (10),
Pin (4 and 8)
Using 3/4-inch brass-tipped driftpin and
two coupler links
2-pound head ball-peen hammer, drive
(11), and backhoe
out.
bucket cylinder
piston rod (12)
2-1811
|
