|
| |
TM 5-2420-222-20-3
LOADER BUCKET CYLINDERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
22.
Loader bucket
Two screws (3)
Screw in and tighten using 9/16-inch,
cylinder (1) and
and new
3/8-inch drive socket and ratchet handle.
indicator guide
lockwashers (4)
tube (2)
23.
Loader bucket
Grease fitting (5)
Screw in and tighten using 7/16-inch open-
cylinder (1)
end wrench.
24.
Adapter (6)
New packing (7)
Place in position.
25.
Loader bucket
Adapter (6) with
a.
Unplug cylinder (1).
cylinder (1)
assembled
b.
Screw in and tighten using 1-inch open-
packing (7)
end wrench.
26.
Adapter (8)
New packing (9)
Place in position.
27.
Loader bucket
Adapter (8) with
a.
Unplug cylinder (1).
cylinder (1)
assembled
b.
Screw in and tighten using 1-inch
packing (9)
open-end wrench.
INSTALLATION
WARNING
Some parts are heavy. Be careful when handling them. Lifting equipment is needed
when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds
(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person
lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy
parts supported only by lifting equipment. Failure to observe this precaution could
cause serious injury or death of personnel.
28.
Loader side
Loader bucket
Using 200-pound capacity lifting equip-
frame (10)
cylinder (1)
ment, place into position and support.
29.
Loader side
Ring (11) and
Using retaining ring pliers, put on.
frame (10) and
washer (12)
loader bucket
cylinder (1)
NOTE
Right side of loader bucket cylinder has indicator pivot, left side bucket cylinder has
washer.
2-1766
|
