|
| |
TM 5-2420-222-20-3
HYDRAULIC OIL FILTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
16.
Cover (1) and
New element (3)
Put in position.
special screw (2)
17.
Cover (1)
New packing (4)
a.
Lubricate with hydraulic fluid.
b.
Place in position.
18.
Oil filter
Cover (1) with
a.
Screw in and tighten until snug using
relief valve (5)
assembled parts and
3/4-inch, 1/2-inch drive socket and
special screw (2)
ratchet handle.
b.
Using 3/4-inch, 1/2-inch drive socket
and 0 to 150 foot-pound capacity torque
wrench, tighten to 55 foot-pounds
(75 N.m) torque.
19.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
20.
Engine
Start (TM 5-2420-222-10).
21.
Oil filter
Cover (1) and
a.
Check for leaks.
relief valve (5)
special screw (2)
b.
If leaking, shut down engine
(TM 5-2420-222-10) and replace
leaking packing or packings as out-
lined in this task.
2-1702
|
