|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-LOADER BOOM CYLINDER ROD END OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
If removing loader control valve-to-left loader boom cylinder rod end oil line, skip step 5.
5.
Two hoses
Clamp (3)
a.
Note relative position for proper
(1 and 2)
placement during installation.
b.
Using 1/4-inch flat-tip screwdriver,
loosen and take off.
NOTE
If removing loader control valve-to-right loader boom cylinder rod end oil line, skip steps 6 thru 8.
Only loader backhoes with Serial Numbers 319995 thru 342573 are equipped with spacer between
clamp and hoses.
6.
Left side
Four hoses
Tag Page 2-137).
frame (4),
(7, 8, 9, and 10)
clamp (5), and
spacer (6), if
present
7.
Screw (11) and
a.
Using 9/16-inch, 3/8-inch drive socket
lockwasher (12)
and ratchet handle, unscrew and take
out.
b.
Get rid of lockwasher (12).
8.
Left side
Clamp (5),
Note relative position to hoses (7, 8, 9,
frame (4)
spacer (6), if
and 10) for proper placement during
present, and four
installation.
hoses (7, 8, 9, and 10)
9.
Tee (13)
Hose (14)
a
Place drain pan underneath.
b
Using 7/8-inch and 1-inch open-end
wrenches, unscrew and take off.
10.
Union (15)
Hose (7)
Using 7/8-inch and 1-inch open-end
wrenches, unscrew and take off.
11
Loader backhoe
Hose (7)
Note routing for proper placement during
installation, take out.
2-1690
|
