|
| |
TM 5-2420-222-20-3
PRESSURE CONTROL VALVE-TO-LOADER CONTROL VALVE OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
25.
Pressure control
a.
Operate loader controls (TM 5-2420-222-10)
valve-to-loader
and check for leaks.
control valve
b.
If leaking at any connection, tighten
oil line
using 7/8-inch, 1-inch, 1 1/16-inch,
and 1 1/4-inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or line as outlined in this
task.
d.
If found leaking, repeat steps 23
thru 25.
26.
Engine
If still running, shut down
(TM 5-2420-222-10).
NOTE
FOLLOW-ON MAINTENANCE: Install right platform (page 2-1079).
TASK ENDS HERE
2-1652
|
