|
| |
TM 5-2420-222-20-3
BACKHOE CONTROL VALVE-TO-BACKHOE STABILIZER CYLINDER OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
41.
Four adapters (1)
Four hoses (2)
a.
Take off tags.
b.
Take off caps.
c.
Screw in and tighten using 7/8-inch
and 1-inch open-end wrenches.
42.
Special union
Two hoses (4 and 5)
a.
Take off tags.
adapter (3)
b.
Take cap off hose (3).
c.
Screw in and tighten using 7/8-inch
and 11/16-inch open-end wrenches.
43.
Union adapter (6)
Nut (7)
Screw on all the way.
44.
New packing (8)
Place in position.
45.
Swing cylinder (9)
Union adapter (6)
a.
Unplug cylinder (7).
with assembled
b.
Screw in and tighten to same relative
parts
position as noted during removal using
7/8-inch open-end wrench.
46.
Union adapter (6)
Nut (7)
Using two 718-inch open-end wrenches,
and swing cylinder (9)
tighten until seated against cylinder (7).
47.
Union adapter (6)
Hose (4)
a.
Take off tag.
b.
Screw in and tighten using 11116-inch
and 7/8-inch open-end wrenches for
right side, or 7/8-inch and 1-inch
open-end wrenches for left side.
48.
Handle mount (10)
Four way lever (11)
Screw in to position noted during
removal.
49.
Handle mount (10)
Nut (12)
Using 15/16-inch open-end wrench,
and four way lever (11)
tighten until seated against handle
mount (8).
50.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
51.
Engine
Start and run at high idle
(TM 5-2420-222-10).
2-1644
|
