|
| |
TM 5-2420-222-20-3
HYDRAULIC OIL FILTER RELIEF VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
49.
Main frame (1)
Valve (4) with
a.
Uncap hoses (2 and 3).
and two hoses
assembled parts
b.
Place in position.
(2 and 3)
50.
Main frame (1)
Two screws (5),
Screw in and tighten using 9/16-inch,
and valve (4)
washers (6), and
3/8-inch drive socket and ratchet handle.
new lockwashers (7)
51.
Hose (2)
Clamp (8)
a.
Slide into position.
b.
Using 1/4-inch flat-tip screwdriver,
tighten.
52.
Union adapter (9)
Hose (10)
a.
Uncap.
b
Take off tag.
Screw in and tighten using 1 1/8-inch
and 1 1/4-inch open-end wrenches.
53.
Hose (3)
Clamp (11)
a.
Slide into position.
b.
Using 1/4-inch flat-tip screwdriver,
tighten.
54.
Two connectors
Hose (14)
a.
Uncap connector (13).
(12 and 13)
b.
Take off tag.
c.
Using 1/4-inch and 3/8-inch flat-tip
screwdrivers, place in position.
55.
Hose (14)
Two clamps
a
Place in position.
(15 and 16)
b
Using 1/4-inch flat-tip screwdriver,
tighten.
56.
Loader backhoe
Hydraulic oil
Install (page 2-1698).
filter
57.
Engine
Start and run at high idle
(TM 5-2420-222-10).
2-1226
|
