|
| |
TM 5-2420-222-20-3
HYDRAULIC OIL FILTER RELIEF VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
42.
Housing (1)
Union adapter (13)
Screw in and tighten using 1 1/4-inch
with assembled
open-end wrench.
packing (14)
43.
Elbow (15)
Nut (16)
Screw on all the way.
44.
New packing (17)
Place in position.
45.
Housing (1)
Elbow (15)
Screw in and tighten to position noted
with assembled parts
during disassembly using 1 1/4-inch open-
end wrench.
46.
Elbow (15) and
Nut (16)
Using two 1 1/4-inch open-end wrenches,
housing (1)
tighten until seated against housing (1).
47
Connector (18)
New spacer ring (19)
Place in position.
48.
Housing (1)
Connector (18)
a
Screw in and tighten using 1 7/8-inch
with assembled
open-end wrench.
spacer ring (19)
b
Take housing (1) out of machinist’s vise
with vise jaw caps.
TA243319
2-1225
|
