| |
TM 5-2420-222-20-3
BACKHOE CONTROL VALVE LEVERS AND LINKAGE (SERIAL NUMBERS 235786 THRU 235999 ONLY) -
CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
39.
Universal block (11)
Spring pin (3)
a.
Using 1-pound head ball-peen hammer
and connector link (2)
and 1/4-inch straight drive-pin punch,
tap in.
b.
Take connector link (2) out of
machinist’s vise.
40.
Pivot block (4)
Universal block (11)
a.
Place pivot block (4) in machinist’s
with assembled parts
vise.
b.
Place in position.
41.
Pivot block (4) and
Spring pin (5)
a.
Using 1-pound head ball-peen hammer
universal block (1)
and 1/4-inch straight drive-pin punch,
tap in.
b.
Take pivot block (4) out of machinist’s
vise.
42.
Connector link (6)
Universal block (7)
a.
Place connector link (6) in machinist’s
vise.
b.
Coat with grease.
c.
Place in position.
43.
Connector link (6)
Spring pin (8)
a.
Using 1-pound head ball-peen hammer
and universal block (7)
and 1/4-inch straight drive-pin punch,
tap in.
b.
Take connector link (6) out of
machinist’s vise.
44.
Handle mount (9)
Universal block (7)
a.
Place handle mount (9) in machinist’s
with assembled parts
vise.
b.
Place in position.
45.
Handle mount (9) and
Spring pin (10)
a.
Using 1-pound head ball-peen hammer
universal block (7)
and 1/4-inch straight drive-pin punch,
tap in.
b.
Take handle mount (9) out of
machinist’s vise.
46.
Handle mount (9)
Pivot block (4) with
a.
Coat with grease.
assembled parts
b.
Place in position.
47.
Handle mount (9) and
Pivot pin (11)
Place in position.
pivot block (6)
2-1310
|