|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE MOUNTING BRACKET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
4.
All metal parts
Look for cracks, breaks, and abnormal bends.
5.
All threaded parts
Look for damaged threads.
INSTALLATION
6. Rear axle
Bracket (2)
Place in position.
housing (1)
7. Rear axle
Two screws (4) and
a.
Screw in until snug using 3/4-inch,
housing (1),
new lockwashers (5)
1/2-inch drive socket and ratchet
bracket (2), and
handle.
Transmission
b.
Using 3/4-inch, 1/2-inch drive
case (3)
socket and 0 to 150 foot-pound
capacity torque wrench, tighten to
85 foot-pounds (115 N•m) torque.
NOTE
FOLLOW-ON MAINTENANCE: Install loader control valve (page 2-1285).
TASK ENDS HERE
TA243348
2-1284
|
