|
| |
TM 5-2420-222-20-2
LOADER CONTROL BOX DOOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Loader control box
Seven screws (3)
Using 1/4-inch flat-tip screwdriver,
(1) and door (2)
unscrew and take out.
2. Loader control
Door (2)
Take off.
box (1)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use
near open flame or excessive heat. The flashpoint is 100°F to 1380F (380 to 590C). If you become dizzy
while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
3.
Door (2)
a.
Using clean rags dampened with dry-
cleaning solvent, wipe clean.
b.
Using clean, dry rags, wipe dry.
4.
All attaching
a.
Clean in drycleaning solvent.
hardware
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts as needed.
5.
Door (2)
Look for crack, breads, and abnormal
bends.
2-1168
|
