| |
TM 5-2420-222-20-2
Section XVI. STEERING
Page
Page
Accumulator Tee-to-Steering Valve .....................
Steering Valve Oil Lines-to-
Oil Line ........................................................2-978
Steering Cylinder Oil Hoses
Special Elbow-to-Left Steering ...(Serial Numbers
319995 thru
Cylinder Oil Hose (Serial Numbers.......................
342573 Only)......................................................................... 2-963
235786 thru 235999 Only)...........................2-950
Steering Valve-to-Transmission
Steering Valve Oil Lines ..............................2-968
Return Oil Line ...................................................................... 2-986
Steering Valve Oil Line-to-Left..............................
Steering Wheel ..................................................................... 2-941
Steering Cylinder Oil Hose (Serial
Tee-to-Right Steering Cylinder Oil
Numbers 235786 thru 235999
Hose (Serial Numbers 235786 thru
Only) ............................................................2-954
235999 Only)......................................................................... 2-958
Steering Valve Oil Line-to-Right Steering
Tie Rod.................................................................................. 2-927
Cylinder Oil Hose (Serial Numbers
235786 thru 235999 Only)...........................2-944
TIE ROD
This task covers:
a. Removal (page 2-928)
e.
Repair (page 2-932)
b. Disassembly (page 2-930)
f.
Assembly (page 2-932)
c.
Cleaning (page 2-931)
g. Installation (page 2-934)
d.
Inspection/Replacement (page 2-932)
h. Adjustment (page 2-936)
INITIAL SETUP
Tools
Tools - Continued
Bar, pinch, 36-inch
Wrench, torque, 1/2-inch drive,
Bar, pry, 15 to 16-inch
0 to 150 foot-pound capacity
Block, wood (four required)
Crayon, marking
NOTE
Drift pin, brass tipped, 3/4-inch
Hammer, cross-peen, 3-pound head
The following tools only apply
Handle, ratchet, 1/2-inch drive
to loader backhoes with Serial
Jack, dolly type, hydraulic,
Numbers 235786 thru 235999.
10-ton capacity
Pliers, slip-joint, multiple tongue
Socket, 1/2-inch drive, 11/16-inch
and groove
Wrench, box, 5/8-inch
Puller kit, mechanical, gear and
bearing
NOTE
Scriber, machinists
Tape, measuring, 50-foot
The following tools only apply
Threading set, screw
to loader backhoes with Serial
Vise, machinists
Numbers 319995 thru 342573.
Wrench, open-end, 7/16-inch
Wrench, open-end, 15/16-inch
Socket, 1/2-inch drive, 3/4-inch
Wrench, pipe, adjustable,
Wrench, box, 3/4-inch
1/2 to 1 1/2-inch
2-927
|