|
| |
TM 5-2420-222-20-2
TRANSMISSION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
12.
Loader backhoe
Engine
Start and warm up for 3 minutes
(TM 5-2420-222-10).
Make sure speed gear assembly
reverser), range transmission
shifter, and gear transmission
shifter are in neutral position
and clutch engaged.
13.
Filler tube (8)
Dipstick (9)
a.
Slide into position.
b.
Pull out and read fluid level.
Fluid level should be between add
and full marks.
c.
If fluid level is below add mark,
repeat steps 11 and 13.
d.
If fluid level is correct, slide into
position.
e.
Tighten.
14.
Center platform (6)
Filler lock (7)
Move over top of dipstick (9).
15.
Transmission
Two drainplugs
a.
Check for leaks.
case (1)
(2 and 4)
b.
If leaking, using 1 1/4-inch, 3/4-inch
drive socket and ratchet handle,
tighten.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace packings as outlined in this
task.
d.
If there were leaks, repeat steps
10 thru 15.
TA243117
2-813
|
