|
| |
TM 5-2420-222-20-2
BATTERY STARTER CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
15.
Battery starter
Two clamps (2)
Put in place as noted during removal.
cable (1)
WARNING
Do not smoke, use open flame, or allow sparks near batteries. The mixture of
oxygen and hydrogen gases released from batteries is highly flammable and can
explode causing serious injury or death.
16.
Loader backhoe
Battery starter
Route into place as noted during removal.
cable (1)
17.
Terminal (3)
Terminal (4) and
a.
Put on.
battery starter
b.
Takeoff tags.
cable terminal (5)
18.
Battery starter
Nut (6) and new
Screw on and tighten using 9116-inch box
cable terminal (5),
lockwasher (7)
wrench.
terminal (4), and
terminal (3)
19.
Two clamps (2)
Two screws (8) and
a.
Put clamps (2) in position noted
new lockwashers (9)
during removal.
b.
Screw in and tighten using 9/16-inch,
3/8-inch drive socket and ratchet
handle.
CONNECTION
WARNING
Do not smoke, use open flame, or allow sparks near batteries. The mixture of
oxygen and hydrogen gases released from batteries is highly flammable and can
explode causing serious injury or death.
Electrolyte and battery corrosion can cause injury. Wear safety goggles and
gloves. If for any reason electrolyte or battery corrosion contacts the eyes, skin, or
clothing, flush immediately with large amounts of cool water and seek medical
attention immediately.
2-716
|
