|
| |
TM 5-2420-222-20-2
VOLTAGE REGULATOR
This task covers:
a. Removal (page 2-452)
c. Inspection/Replacement (page 2-456)
b. Cleaning (page 2-454)
d. Installation (page 2-457)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, screwdriver grip spin,
Nut, assembled washer, ac generator terminal
1/4-inch drive
(two required)
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 21, Appendix C)
Screwdriver, flat-tip, 3/16-inch
Solvent, drycleaning, (item 28, Appendix C)
Socket, 1/4-inch drive, 5/16-inch
Tags, marking (item 30, Appendix C)
Socket, 3/8-inch drive, 3/8-inch
Wrench, open-end, 7/16-inch
Personnel Required
(two required)
One
Materials/Parts
Equipment Condition
Cleaning compound, solvent
(item 4, Appendix C)
Battery ground cable disconnected
Lockwasher, ac generator plate
(page 2-696)
terminal nut
ACTION
LOCATION
ITEM
REMARKS
NOTE
Loader backhoe voltage regulators are available in two different configurations.
Both configurations are maintained the same way. One configuration is shown.
REMOVAL
NOTE
Steps 1 thru 3 do not apply if ac generator has been removed.
1.
Connector (1)
Connector (2)
a.
Tag (page 2-137).
b.
Using 3/16-inch flat-tip screwdriver,
lift up lock tab.
c.
Unplug.
2-452
|
