|
| |
TM 5-2420-222-20-2
WARNING LIGHTS - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Connect battery ground cable (page 2-696).
TASK ENDS HERE
COMBINATION TAIL AND STOPLIGHTS
This task covers:
a.
Removal (page 2-633)
e.
Repair (page 2-636)
b.
Disassembly (page 2-634)
f.
Assembly (page 2-636)
c.
Cleaning (page 2-634)
g.
Installation (page 2-637)
d.
Inspection/Replacement (page 2-636)
INITIAL SETUP
Tools
Materials/Parts - Continued
File, thread restoring
Rags, wiping (item 21, Appendix C)
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28, Appendix C)
Screwdriver, cross-tip, number 2
Socket, deep, 3/8-inch drive,
Personnel Required
7/16-inch
One
Materials/Parts
Equipment Condition
Cleaning compound, solvent
(item 4, Appendix C)
Battery ground cable disconnected
Detergent, GP (item 7, Appendix C)
(page 2-696)
Lockwasher, taillight nut (two required)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both combination tail and stoplights are maintained the same way. One light is shown. Repeat
procedures for other light as needed.
REMOVAL
NOTE
It is not necessary to remove combination tail and stoplight to disassemble it.
2-633
|
