|
| |
TM 5-2420-222-20-2
WARNING LIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Warning light can be assembled either removed or installed.
20.
Canopy roof (1)
Rubber washer (2)
a.
If removed, apply metal adhesive.
b.
Line up and press into place.
c.
Take off and allow metal adhesive to
set for two minutes.
d.
Line up and press firmly in place.
21.
Warning light (3)
Put in place with red lens toward
and assembled parts
rear of loader backhoe.
22.
Warning light (3)
Washer (4), new
Screw on and tighten using 7/16-inch
and canopy
lockwasher (5),
open-end wrench.
roof (1)
and nut (6)
23.
Connector (7)
Connector (8)
a.
Plug in.
b.
Take off tag.
TA243023
2-632
|
