 |
|||
|
|
|||
|
Page Title:
THERMOSTAT HOSES AND CLAMPS - CONTINUED |
|
||
| ||||||||||
|
|
 TM 5-2420-222-20-1
THERMOSTAT HOSES AND CLAMPS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only
in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not
use near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become
dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is
made, wash your eyes with water and get medical aid immediately.
5.
Two clamps (1)
a. Clean in drycleaning solvent.
b. Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts as needed.
6.
Preformed hose (2)
Look for swelling, cracking, hardening,
or straight hose (3)
and separation inside and out.
7.
Two clamps (1)
Look for cracks, breaks, and damaged
threads.
INSTALLATION
8. Preformed hose (2)
Two clamps (1)
Slide on.
or straight hose (3)
9. Adapter (4)
Preformed hose (2)
Push on.
and elbow (5)
or straight hose (3)
with assembled
clamps (1)
10. Preformed hose (2)
Two clamps (1)
Using 3/16-inch flat-tip screwdriver,
or straight hose (3)
tighten.
2-402
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals