REMOVAL (cont) -624880435

TM 5-2420-222-20-1

RADIATOR - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

16.

Front support (1),

Radiator (5) with

a. Take out.

two rubber washers

assembled oil

b. Let oil from oil cooler drain into

(2 and 3), and

cooler (6)

1-gallon container.

lower oil cooler

c. Get rid of oil (page 2-137).

hose (4)

17.

Fan (7)

Fan shroud (8)

Take off.

NOTE

If removing radiator to access fan shroud, skip steps 18 thru 46.

18.

Front support (1)

Two rubber washers

Take off.

(2 and 3)

WARNING

Water soluble cleaning compound solvent is flammable and fumes are toxic. Flashpoint is 220F (104C).

Boiling point is 212F (100C). Do not store in temperatures above 150F (65C) or below 35F (20C).

Do not use near open flame or excessive heat. Do not wear jewelry, wear rubber gloves and goggles, and

use only in well ventilated area. Avoid contact with skin, eyes, and clothes, and don't breathe vapors.

Avoid contact with acids, aluminum, or zinc; chemical reaction may result. If you become dizzy while

using cleaning compound solvent, get fresh air immediately and get medical aid. If contact with eyes is

made, wash your eyes with water and get medical aid immediately.

CAUTION

Do not remove packing and baffle unless inspection shows need for replacement. Removal may damage

parts.

19.

Front support (1)

Packing (9) and

a. Using cleaning compound solvent, dis-

baffle (10)

solve adhesive and take off.

b. Using clean rag soaked in cleaning

compound solvent, remove all adhesive

from support (1).

c. Using clean rag dampened with clean

water, rinse support (1).

d. Using clean, dry rags, wipe support

(1) dry.

2-374