HAND THROTTLE CABLE - CONTINUED -624880385

TM 5-2420-222-20-1

HAND THROTTLE CABLE - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

14.

Bracket (1) and

Screw (3) and

a. Using 9/16-inch, 3/8-inch drive socket

cowl support (2)

lockwasher (4)

and ratchet handle, unscrew and take

out.

b. Get rid of lockwasher (4).

15.

Cowl support (2)

Bracket (1)

Take off.

DISASSEMBLY

16.

Cable (5)

Swivel (6)

a. Position cable (5) in machinist's vise

with vise jaw caps.

b. Note number of exposed threads on

cable (5) for proper placement during

installation.

c. Using 1/2-inch open-end wrench,

unscrew and take off.

d. Take cable (5) out of machinist's vise

with vise jaw caps.

CLEANING

NOTE

For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in

a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become dizzy

while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,

wash your eyes with water and get medical aid immediately.

17.

Cable (5)

a. Using clean rags dampened in dry-

cleaning solvent, wipe clean.

b. Using clean, dry rags, wipe dry.

18.

All other parts

a. Clean in drycleaning solvent.

b. Using clean, dry rags, wipe dry.

2-324