INSPECTION/REPLACEMENT -624880379

TM 5-2420-222-20-1

HAND THROTTLE LEVER - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANING - CONTINUED

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in

a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become dizzy

while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,

wash your eyes with water and get medical aid immediately.

16.

Al other parts

a. Clean in drycleaning solvent.

b. Using clean, dry rags, wipe dry.

INSPECTION/REPLACEMENT

NOTE

For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).

Replace defective parts which cannot be repaired.

17.

Knob (1) and two

Look for cracks and breaks.

facing (2)

18.

All other parts

Look for cracks, bends, and breaks.

19.

All threaded parts

Look for damaged threads.

REPAIR

20.

Bracket (3)

If threads are damaged, using screw

threading set, restore threads.

ASSEMBLY

21.

Bracket (3)

Two facings (2),

a. Place bracket (3) in machinist's vise.

throttle lever (4),

b. Slide on.

plate (5), and

spring (6)

2-318