 |
|||
|
|
|||
|
Page Title:
ENGINE STARTING AID FLUID INJECTION SOLENOID |
|
||
| ||||||||||
|
|
 TM 5-2420-222-20-1
FUEL FILTER-TO-FUEL METERING PUMP FUEL LINE CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION CONTINUED
14. Loader backhoe
Fuel filter-to-fuel
a. Check for leaks.
metering pump fuel
b. If leaking at any connection, tighten line
using 5/8-inch open-end wrench, or 3/4-inch
open-end wrench or 0 to 1.322-inch adjustable
wrench.
c.
If leaking does not stop, shut down engine (TM
5-2420-222-10) and replace defective
component as outlined in this task.
15.
Engine
If still running, shut down (TM 5-2420-222-10).
TASK ENDS HERE
ENGINE STARTING AID FLUID INJECTION SOLENOID
This task covers:
a. Removal (page 2-297)
d.
Inspection/Replacement (page 2-302)
b. Disassembly (page 2-299)
e.
Assembly (page 2-302)
c. Cleaning (page 2-300)
f.
Installation (page 2-303)
INITIAL SETUP:
Tools
Materials/Parts
Handle, ratchet, 318-inch
Cleaning compound, solvent
Knife, pocket
(item 4, Appendix C)
Socket, 3/8-inch drive, 112-inch
Lockwasher, solenoid screw
Wrench, box, 1/2-inch
Rags, wiping (item 21, Appendix C)
Wrench, open-end, 318-inch
Solvent, drycleaning (item 28, Appendix C)
Wrench, open-end, 7/16-inch
Personnel Required
One
NOTE
The following tool only
applies to loader backhoes
with Serial Numbers
235786 thru 235999.
Extension, 3/8-inch, 5-inch 2-296
2-296
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals