FUEL FILTER ELEMENTS - CONTINUED
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
Clean in solution of detergent and water.
Rinse In clean water.
Using clean, dry rags, wipe dry.
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only
in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not
use near open flame or excessive heat. The flashpoint Is 1000F to 1380F (380 to 590C). If you become
dizzy while using cleaning solvent, get fresh air Immediately and get medical aid. If contact with eyes is
made, wash your eyes with water and get medical aid immediately.
All other parts
a. Clean in drycleaning solvent.
b. Using clean, dry rags, wipe dry.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts as needed.
Look for cracks and breaks.
All threaded parts
Look for damaged threads.
No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel tank
and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all flammable
liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to
observe these precautions could cause