INSTALLATION -624880343

TM 5-2420-222-20-1

FUEL FILTER ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION - CONTINUED

WARNING

No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel tank

and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all flammable

liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to

observe these precautions could cause serious injury.

16. Cylinder head (1)

Filter head (3)

Place in position.

or bracket (2)

17. Filter head (3),

Two screws (4)

Screw in and tighten using 9/16-inch,

cylinder head (1),

3/8inch drive socket, 5-inch extension,

and bracket (2),

and ratchet handle.

if present

18. Filter head (3)

Elbow (5)

Screw in and tighten to position noted

during removal using 0 to 1.322-inch

adjustable wrench.

19. Elbow (5)

Fuel line (6)

a. Uncap.

b. Screw on and tighten using 518inch

open-end wrench.

20. Filter head (3)

Elbow (7)

Screw in and tighten to position noted

during removal using 0 to 1.322-inch

adjustable wrench.

21. Elbow (7)

Fuel line (8)

a. Uncap.

b. Screw on and tighten using 5/8-inch

open-end wrench.

22. Engine

Fuel filter elements

Install (page 2-284).

23. Loader backhoe

Engine

Start and run at high idle.

(TM 5-2420-222-10).

2-282