CLEANING -624880341

TM 5-2420-222-20-1

FUEL FILTER ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANING

NOTE

For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).

9. Two bleed plugs (1)

a. Clean in solution of detergent and

water.

b. Using clean, dry rags, wipe dry.

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only

in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not

use near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become

dizzy while using cleaning solvent, get fresh air Immediately and get medical aid. If contact with eyes is

made, wash your eyes with water and get medical aid immediately.

10. All metal parts

a. Clean in drycleaning solvent.

b. Using clean, dry rags, wipe dry.

INSPECTION/REPLACEMENT

NOTE

For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).

Replace defective parts which cannot be repaired.

11.

All parts

Look for cracks and breaks.

12.

All threaded parts

Look for damaged threads.

REPAIR

13.

Filter head (2)

If threads are damaged, using pipe

thread set, restore threads.

2-280