AIR CLEANER HOSES AND PIPES - CONTINUED
DISASSEMBLY - CONTINUED
Water soluble cleaning compound solvent is flammable and fumes are toxic. Flashpoint is 2200F
(1040C). Boiling point is 2120F (1000C). Do not store in temperatures above 150F (65C) or below
35F (2C). Do not use near open flame or excessive heat. Do not wear jewelry, wear rubber gloves
and goggles, and use only in well ventilated area. Avoid contact with skin, eyes, and clothes, and
don't breathe vapors. Avoid contact with acids, aluminium, or zinc; chemical reaction may result.
If you become dizzy while using cleaning compound solvent, get fresh air immediately and get
medical aid. If contact with eyes is made, wash your eyes with water and get medical aid
Do not remove cushion unless inspection shows need for replacement. Removal may damage parts.
a. On loader backhoes with Serial Numbers
319995 thru 342573 only, note position for
proper placement during assembly.
b. Using cleaning compound solvent, dissolve
adhesive and take off.
c. Using clean rag soaked in cleaning compound
solvent, remove all adhesive.
d. Rinse with clean water.
e. Using clean, dry rags, wipe dry.
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
All rubber and
a. Using clean rags dampened with
solution of detergent and water, wipe clean.
b. Rinse with clean water.
c. Using clean, dry rags, wipe dry.