DISASSEMBLY -624880269

TM 5-2420-222-20-1

FUEL INJECTION CAPS AND HOSES - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

DISASSEMBLY

WARNING

No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel tank

and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all flammable

liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to

observe these precautions could cause serious Injury.

NOTE

There are four caps and three hoses which connect in series. One connection Is shown. Repeat steps 10

thru 15 for remaining connections.

10.

Cap (1) and

Nut (3)

Using 9/16-inch open-end wrench, un-

hose (2)

screw all the way.

11.

Hose (2)

Cap (1)

Take off.

12.

Grommet (4) and

Slide off

nut (3)

13.

Cap (5) and

Nut (6)

Using 9/16-inch open-end wrench, un-

hose (2)

screw all the way.

14.

Cap (5)

Hose (2)

Take off.

15.

Hose (2)

Grommet (7) and

a. Slide off.

nut (6)

b. Repeat steps 10 thru 15 for remaining

connections.

CLEANING

NOTE

For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).

16.

All grommets

a. Clean in solution of detergent and

water.

b. Using clean water, rinse.:/

c. Using clean, dry rags, wipe dry.

2-208