INSPECTION/REPLACEMENT -624880259

TM 5-2420-222-20-1

CLUTCH PEDAL - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANING - CONTINUED-

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in

a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat. The flashpoint is 100F to 1380F (380 to 590C). If you become dizzy

while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,

wash your eyes with water and get medical aid immediately.

15.

All metal parts

a. Clean in drycleaning solvent.

b. Using clean, dry rags, wipe dry.

INSPECTIONIREPLACEMENT

NOTE

For more information on how to Inspect parts, go to General Maintenance Instructions (page 2-137).

Replace defective parts as needed.

16.

Pad (1)

Look for tears and crumbling.

17.

All metal parts

Look for cracks, bends, and breaks.

18.

All threaded parts

Look for damaged threads.

ASSEMBLY

19.

Pedal (2)

Stop (3)

Place in position.

20.

Pedal (2) and

Two washers (4)

Place in position.

stop (3)

21.

Pedal (2),

Pin (5)

a. Aline holes in pedal (2), stop (3) and

stop (3), and

two washers (4).

two washers (4)

b. Using 1-pound head ball-peen hammer,

tap in.

22.

Pedal (2)

Pad (1)

Place In position.

23.

Bushing (6)

If removed, using 1.0625inch remover

and installer and arbor press, press In.

2-198