LUBRICATING COOLER-TO-WATER PUMP COOLANT LINES

TM 5-2420-222-20-1

LUBRICATING COOLER-TO-WATER PUMP COOLANT LINES - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

1. Plate (1) and

Screw (3) and

a. Using 9/16-inch, 112-inch drive socket

filler neck (2)

lockwasher (4)

and ratchet handle, unscrew and take

out.

b. Get rid of lockwasher (4).

2. Plate (1) and

Screw (6) and

a. Using 1/4-inch flat-tip screwdriver,

clamp (5)

lockwasher (7)

unscrew and take out.

b. Get rid of lockwasher (7).

3. Two pipes (8 and 9)

Plate (1)

Take off.

and filler neck (2)

4. Two pipes (8 and 9)

Clamp (5)

Take off.

5. Hose (10)

Two clamps (11)

Using 1/4-inch flat-tip screwdriver,

loosen.

6. Cooler(12) and

Hose (10) with

Take off.

pipe (8)

assembled two

clamps (11)

7. Hose(10)

Two clamps (11)

Slide off.

8. Hose (13)

Two clamps (14)

Using 114-inch flat-tip screwdriver,

loosen.

9. Pipe (8)

Take out.

10.

Two clamps (14)

Slide off.

11. Water pump tube (15)

Hose (13)

Take off.

CLEANING

NOTE

For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).

12. All rubber parts

a. Using clean rags dampened in solution

of detergent and water, wipe clean.

b. Using clean water, rinse.

c. Using clean, dry rags, wipe dry.

2-178