VENTILATOR PIPE - CONTINUED
1. Clamp (1) and
Screw (3) and
Using 1/2-inch, 1/2-inch drive socket
ratchet handle, unscrew and take out.
2. Pipe (5) and
3. Rocker arm
cover (6) and
4. Rocker arm
a. Using pocket knife, take out.
b. Get rid of.
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do
not use near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you
become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If contact
with eyes is made, wash your eyes with water and get medical aid immediately.
a. Using clean rags dampened in dry-
cleaning solvent, wipe clean.
b. Using clean, dry rag, wipe dry.
All other parts
a. Clean in drycleaning solvent.
b. Using clean, dry rags, wipe dry.