OIL FILLER NECK

TM 5-2420-222-20-1

OIL FILLER NECK

This task covers:

a. Removal (page 2-164)

Repair (page 2-166)

b. Cleaning (page 2-165)

Installation (page 2-166)

c. Inspection/Replacement (page 2-166

INITIAL SETUP:

Tools

Materials/Parts - Continued

Tile, thread restorer

Solvent, drycleaning (item 28, Appendix C)

Handle, ratchet 318-inch drive

Socket, 3/8-inch drive, 9/16-inch

Personnel Required

Materials/Parts

One

Gasket, filler neck

Equipment Condition

Lockwasher, filler neck screw

(two required)

Oil filler cap removed

Rags, wiping (item 21, Appendix C)

(TM 5-2420-222-10)

ACTION

LOCATION

ITEM

REMARKS

NOTE

Oil filler necks on all loader backhoes are maintained the same way. Oil filler neck used on loader

backhoes with Serial Numbers 319995 thru 342573 is shown.

REMOVAL

1. Filler neck (1),

Long screw (4)

a. Using 9116-inch, 3/8-inch drive socket

plate (2), and

and lockwasher (5)

and ratchet handle, unscrew and take

timing gear

out.

cover (3)

b. Get rid of lockwasher (5).

2. Filler neck (1)

Short screw (6)

a. Using 9116-inch, 3/8-inch drive socket

and timing

and lockwasher (7)

and ratchet handle, unscrew and take

gear cover (3)

b. Get rid of lockwasher (7).

3. Filler neck (1)

Plate (2) with

Take off.

assembled parts

4. Timing gear

Filler neck (1)

a. Take off.

cover (3)

and gasket (8)

b. Get rid of gasket (8).

2-164