ROCKER ARM COVER - CONTINUED
REMOVAL - CONTINUED
2. Cylinder head (1)
Cover (2) with
a. Take off.
b. Get rid of gasket (3).
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do
not use near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you
become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If contact
with eyes is made, wash your eyes with water and get medical aid immediately.
a. Clean in drycleaning solvent.
b. Using clean, dry rags, wipe dry.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts as needed.
Look for cracks, bends, and breaks.
a. Look for cracks and breaks.
washer bolts (4)
b. Look for damaged threads.
6. Cylinder head (1)
New gasket (3) and
Place in position.