BRAKES -624880168

TM 5-2420-222-20-1

ORGANIZATIONAL TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

a. If clutch pedal linkage is bent or binding, replace (page 2-186).

b. If clutch pedal linkage is improperly adjusted, adjust (page 2-186).

c. If clutch pedal linkage is not bent, binding, or Improperly adjusted, go to step 3.

Step 3. Go to Transmission Malfunction 2: Transmission Shifts Too Fast Or Too Slow (page 2-106).

BRAKES

1. ONE BRAKE DOES NOT WORK

Step 1. Check for air in system, contaminated fluid, and restrictions in hydraulic lines by bleeding hydraulic brake

system (page 2-870).

a. Bleeding procedure removes air from brake system.

b. If air cannot be removed from system, or if fluid is contaminated, notify Direct Support

Maintenance.

c. If there is poor or no fluid flow, go to step 2.

2-107