|
|
TM 5-2420-222-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAUTION
Do not operate electric starting motor for more than 20 seconds at a time. Allow two minutes for
cooling before using starter again to prevent overheating.
Step 10.
Using 9/16-inch and 314-inch open-end wrenches, unscrew tube (7) at fuel injection nozzle (8)
approximately one-half turn. Have assistant turn ignition lock switch (3) clockwise to ignition and
push in and hold starter switch (9) for a few seconds. Check that diesel fuel squirts out from
between tube (7) and nozzle (8). Have assistant turn ignition lock switch (3) counterclockwise to off.
a. If diesel fuel squirted out from tube (7), go to Engine Malfunction 5: Engine Runs Unevenly
(page 2-47).
b. If diesel fuel did not squirt out from tube (7), go to step 11.
2-43
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |