ENGINE FAILS TO CRANK WHEN STARTER IS ENGAGED WARNING (cont) -624880088

TM 5-2420-222-20-1

ORGANIZATIONAL TROUBLESHOOTING CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

b. If multimeter reads less than 11 vdc, turn ignition lock switch (6) counterclockwise to off. Repair wire from

starter neutral safety switch to ignition lock switch (page 2-137).

Step 20.

Using multimeter set to 30 vdc scale, place red probe on starter neutral safety switch terminal (9)

and black probe on transmission case (8). Check for 11 to 13 vdc on multimeter.

a. If multimeter reads 11 to 13 vdc, go to step 21.

b. If multimeter reads less than 11 vdc, turn ignition lock switch (6) counterclockwise to off. Replace

starter neutral safety switch (page 2-471).

TA242719

2-27