ENGINE FAILS TO CRANK WHEN STARTER IS ENGAGED WARNING (cont) -624880082

TM 5-2420-222-20-1

ORGANIZATIONAL TROUBLESHOOTING CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

a. If terminals (6 and 7) and wire terminals (8 thru 10) are not loose, corroded, frayed or broken, go

to step 9.

b. If connection on terminal (6) is loose, tighten nut (11) using 3/8 inch box wrench.

c. If connection on terminal (7) is loose, tighten nut (12) using 318 inch combination box and open-

end wrench.

d. If connection on terminal (6 and 7) and wire terminals (8 thru 10) are corroded, clean using wire

brush.

e. If terminals (6 or 7) are broken, replace 40 ampere circuit breaker (page 2-516).

f. If connection on wire terminals (8 thru 10) are frayed or broken, repair (page 2-137).

2-21