 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-241O-237-34
3-19. CONNECTING ROD BEARINGS - REPLACE (Cont'd)
(2) Remove the lower half of the
connecting rod bearing (4) from
the connecting rod cap (2).
(3) Repeat STEPS 1 and 2 for other
five connecting rod bearing
halves.
(4) Push the connecting rods away
from the crankshaft. Remove the
upper half of the connecting rod
bearing (5) from the connecting
rod.
(5) Repeat STEP 3 for the other five
connecting rod bearing halves.
b. Installation
NOTE
Install the connecting rod
bearings dry when the
clearance checks are made.
Ensure that the tabs in the
back of the connecting rod
bearings are in the tab
grooves of the connecting
rod and cap.
(1) Install the upper half of the
connecting rod bearings (5) on
the connecting rod.
(2) Repeat STEP 1 for the other five
connecting rod bearing halves.
(3) Install the lower half of the
connecting rod bearing (4) in the
connecting rod cap (2).
(4) Repeat STEP 3 for the other five
connecting rod bearing halves.
(5) Put plastigage on the connecting
rod bearing to check clearance.
3-86
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals