 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-241O-237-34
3-18. PISTONS, CONNECTING RODS, PISTON PINS AND RINGS -
REPLACE/REPAIR (Cont'd)
CAUTION
Place tape over the threads of
the connecting rod capscrews (4).
This will prevent damage to the
crankshaft when the rods are
removed.
CAUTION
Be careful not to damage the
crankshaft or the cylinder wall
liners while removing the
connecting rods. Damage of
these components could result in
premature engine failure.
(4) Slide piston and connecting rod
assembly (5) up through cylinder
block and remove from engine.
Remove bearing half (6).
NOTE
Mark each connecting rod and
piston assembly with identifi-
cation as to its proper location
in the engine.
(5) Repeat STEPS 1 through 4 for
remaining pistons.
b. Disassemble
(1) Use a ring expander to remove the
rings (7, 8 and 9) from the
pistons (10).
(2) Remove retaining ring (11),
piston pin (12) and connecting
rod (13) from the piston (10).
WARNING
Use insulated gloves for
handling hot and cold parts
to avoid personal injury.
3-78
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals