 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-241O-237-34
3-9. CYLINDER HEAD ASSEMBLY AND SPACER PLATE - REPLACE/REPAIR (Cont'd)
(7) Install new cylinder head
gasket (6) on spacer plate.
(8) Install 3/4" eyebolt (5) at
rear of cylinder head. If
engine is removed from vehicle,
also install a 3/4" eyebolt at
front of cylinder head.
(9) Attach lifting equipment,
capable of lifting 300 lbs.,
to the eyebolt and engine
front lifting plate or eyebolt.
(10) Carefully place the cylinder
head in the correct position on
the cylinder block.
(11) Remove lifting device and
eyebolt(s).
(12) If engine is installed in
vehicle:
(a) Support the fan drive with
lifting equipment.
(b) Remove the fan drive support
bracket (TM5-241O-237-2O).
(c) Install the front engine
lifting bracket.
(d) Install the fan drive support
bracket (TM5-2410-237-20) and
spacer.
(13) Install valve mechanism, but do
not torque tighten capscrews at
this time. Refer to page 3-95.
(14) Put anti-seize compound on the
threads of the cylinder head
capscrews.
3-40
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals