 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE TILT AND RIPPER PILOT VALVE ASSEMBLY REPAIR - CONTINUED
0245 22
ASSEMBLY - CONTINUED
13.
Apply antiseize compound to pipe threads of eight adapters (6), if present, and install adapters on pilot valve assembly
(2).
14.
Apply antiseize compound to pipe threads of three elbows (5), if present, and install elbows on pilot valve assembly (2).
15.
Install new shaft seal (4) and new housing O-ring (3) in housing (1). Position housing over stem of ripper pilot valve (9).
16.
Install two washers and capscrews (removed when linkage was disconnected from pilot valve) finger tight to hold hous-
ing (1) on ripper pilot valve (9).
1
3,4
2
6
5
387-608
17.
Repeat steps 15 and 16 for blade tilt pilot valve (10).
18.
Install protective caps over all openings and fittings in pilot valve in pilot valve assembly.
END OF WORK PACKAGE
0245 22-9
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals