|
|
TM 5-2410-237-23
WINCH CONTROL VALVE REPAIR - CONTINUED
0245 20
DISASSEMBLY - CONTINUED
28.
Remove three capscrews (62) and lockwashers (63)
from sequence valve (64). Discard lockwashers.
29.
Remove capscrew (65) and lockwasher (66) from
sequence valve (64). Discard lockwasher.
30.
Separate sequence valve (64) from pressure control
valve (25). Remove and discard gasket (67) and pre-
formed packing (68).
31.
Remove plug (69). Remove and discard preformed
packing (70) from plug.
25
32.
Remove plug (71). Remove and discard preformed
packing (72) from plug.
33.
Remove retainer (73) from sequence valve (64). Do
77
not remove pin (74) from retainer unless damaged.
67
64
34.
Remove spring (75) and valve spool (76) from
sequence valve (64).
78 62
35.
Remove plug (77). Remove and discard preformed
packing (78) from plug.
68
63
64
69
71
66
65
74
75
76
70
72
73
421-0184
Change 1
0245 20-6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |